Blog

Credentials of Value: What Ohio House Bill 1030 Could Mean for Construction

Table of Contents

Ohio House Bill 1030 proposes a state list of credentials of value that would determine which certifications qualify for TechCred reimbursement. For ABC Ohio Valley member employers, apprenticeship sponsors, and workforce leaders in southwest Ohio’s construction industry, this bill directly affects how craft training gets funded. Here is what we know, what remains uncertain, and what you can do now.

Confirm the Bill’s Current Status for ABC Ohio Valley Members

HB 1030 has not passed. The bill remains in “Introduced” status and has not been reported out of committee.

Representatives Josh Williams and Mike Odioso introduced HB 1030 on October 19, 2026. The bill’s full title references amendments to Ohio Revised Code sections 122.178 and 4141.162, along with the creation of a new section, 122.1714. All three sections relate to approved credentials of value for the TechCred Program and the Individual Microcredential Assistance Program.

If enacted, the bill would change which credentials TechCred reimburses. Rather than relying on the current eligible-credential list and case-by-case review, TechCred eligibility would be tied to a state-maintained list of credentials of value. That list does not yet exist. The proposal includes criteria for building it, and construction stakeholders have a window to help shape it.

A group of construction workers, equipped with hard hats and safety vests, is intently reviewing blueprints at a commercial job site, showcasing the skills and training needed for safe and effective project execution. This scene highlights the importance of industry-recognized credentials and education for students and employers in the construction field.

Explain the Ohio Department Framework Behind the Proposal

The Ohio Department of Development administers the TechCred Program under Revised Code section 122.178. That statute defines a “microcredential” as an industry-recognized credential or certificate that can be completed in no more than one year and is approved by Ohio’s Chancellor of Higher Education. Educational qualifications provide evidence of foundational knowledge required for many positions, and the current TechCred structure reflects that principle by requiring credentials to meet education and training standards before employers can access reimbursement.

HB 1030 proposes three statutory changes:

  • RC 122.178 (amended): Revises the existing TechCred statute to require credentials on the new state list.
  • RC 4141.162 (amended): Adjusts the Individual Microcredential Assistance Program statute to align with the same list.
  • RC 122.1714 (new): Creates the framework for the credentials of value list itself, including evaluation factors and maintenance procedures.

Ohio’s workforce development programs already serve local employer needs by connecting training dollars to labor-market demand. HB 1030 would formalize that connection through a single, measurable list rather than program-by-program approval.

Connect Credentials of Value to IMAP

The Individual Microcredential Assistance Program helps low-income Ohioans who are partially or totally unemployed participate in training programs and earn industry-recognized credentials at no cost. Training providers cover all tuition, fees, and exam costs. Ohio received a $500,000 IMAP grant for workforce development, and the IMAP grant program received $500,000 for credential training specifically aimed at improving the employability of Ohio residents.

Training programs also help high school students earn microcredentials before entering the labor force, building a pipeline of workers with verified skills employers need.

Ohio offers free training for industry-recognized credentials through IMAP, and HB 1030 would bind both IMAP and TechCred to the same credentials of value list. Credentials of value are qualifications that provide a measurable return on investment; under the bill, that return would be judged on five evaluation factors:

  1. Employer recognition: Do employers in the field seek or require the credential?
  2. Portability: Can workers carry the credential across employers and regions?
  3. Return on investment: Does the credential justify the cost of training?
  4. Employment outcomes: Do credential holders find employment at higher rates?
  5. Wage outcomes: Do credential holders earn more than non-holders?

These criteria represent a shift toward outcome-based funding. Credentials of value are instrumental in career advancement and establishing professional credibility, and the proposed list would require proof of that value before state dollars flow.

Establish the October TechCred Changes

The current TechCred application round runs from October 1 through October 30, 2026. Employers may apply beginning at 9:00 a.m. on October 1; the deadline is 3:00 p.m. on October 30. These October TechCred changes apply to every employer preparing a TechCred application this month.

Key funding parameters for this round:

Parameter Current Cap
Reimbursement per person, per credential $1,000
Maximum per application $30,000
Maximum credential duration Less than 12 months (or fewer than 900 clock hours / 30 credit hours)

The credential definition has tightened. Eligible credentials must be industry-recognized, technology-focused, and short-term. Credentials focused on leadership, safety philosophy, process improvement, or general theoretical topics (rather than applied technical skills) are excluded. Micro-credentials offer agile proof of modern skills that align with current job market demands, but only those meeting the technology-focused definition qualify under this round.

A group of students participates in a hands-on training workshop, practicing with electrical and mechanical equipment to gain industry-recognized skills and certifications. This educational program, offered by the Ohio Department, focuses on providing the necessary training for current and future employers.

Clarify Current NCCER Eligibility

NCCER provides nationally recognized construction credentials and standardized training for construction professionals across more than 40 trades. Despite that scope, Ohio’s current pre-approved TechCred eligible-credential list does not include NCCER craft credentials.

Employers who want TechCred reimbursement for NCCER certifications must use the “Credential Not Listed” process within the application. That process requires:

  • A course outline and learning objectives for the NCCER credential
  • Documentation that the credential meets TechCred’s technology-focused definition
  • Proof that the selected TechCred training provider is on the eligible providers list
  • Cost documentation and proof of payment

The state publishes a TechCred preparation guide to help employers assemble applications correctly. Before you click “submit,” verify that your training provider holds the required accreditation or registration. A provider may operate an NCCER program, but the credential itself must clear the “Credential Not Listed” review if it is not already on the pre-approved list.

This workaround functions, but it adds administrative burden to every application cycle. If HB 1030 passes and NCCER credentials land on the state credentials of value list, that cycle-by-cycle review could be replaced by durable, standing eligibility.

Assess Construction Implications of the Proposed List

The proposed credentials of value list presents a clear opportunity for construction. If NCCER credentials meet the five evaluation criteria, they could secure a permanent place on the list, eliminating the “Credential Not Listed” workaround and creating a stable reimbursement pathway for employers.

Here is how NCCER credentials could align with each factor:

Employer recognition. Employers value recognized credentials, which differentiate candidates in tight labor markets. Contractor job postings, apprenticeship standards, and hiring practices that reference NCCER levels provide evidence. Data show that recognized credentials justify higher salaries and improvement in earnings potential; NCCER credential holders often qualify for pay increases tied to level completion.

Portability. NCCER credentials are tracked through an online Registry where credential levels, trade, location, and date earned are standardized and verifiable. Workers can share their records with any employer, in any state. Credentials influence job mobility and professional transitions across different companies, and NCCER’s portable Registry is a concrete example of that principle in action.

Employment and wage outcomes. Market-aligned credentials lead to tangible outcomes, such as higher wages and greater job security. NCCER’s programs cover all aspects of construction trades, from electrical and pipefitting to carpentry and heavy equipment operations. Specialized credentials can support promotions by meeting explicit minimum qualification requirements at each craft level.

Apprenticeship alignment. The NCCER Core curriculum is required in many registered apprenticeship programs. Stackable craft modules build from Core to Level 1 to Level 2 and beyond, mapping directly to the registered apprenticeship pipeline. This structure supports wage progression, career laddering, and documentation that apprenticeship sponsors already maintain. The skills needed at each level are defined, assessed, and recorded.

A close-up image shows construction workers' hands skillfully operating power tools on a steel framework, emphasizing the essential skills and training needed in the construction industry. This scene highlights the importance of industry-recognized credentials and certifications for students seeking to meet employer expectations and ensure safe working conditions.

Identify Risks for Smaller and Emerging Programs

The same outcome-based criteria that could benefit established NCCER credentials could exclude credentials that lack sufficient data. Smaller crafts or newer programs face three risks under the proposed framework.

Limited outcome data. Credibility for inclusion on a credentials of value list depends on employment rates after credentialing, wage gains, and retention. Newer NCCER programs or those with low enrollment volumes may not have enough longitudinal data to demonstrate impact. Even if the training meets a real workforce need, sparse numbers weaken the statistical case.

Workforce gap in specialized trades. Smaller construction crafts (pipefitting, ironwork, instrumentation) may have fewer participants in any given region. A workforce gap in those trades does not mean the credential lacks value; it means the sample size for outcome measurement is small. The evaluation criteria should account for that, but until rulemaking defines the details, the risk remains.

Documentation burden for small contractors. For merit-shop contractors operating craft training without strong institutional backing, gathering required course documentation, accreditation records, and employer-partnership evidence may be time-consuming. New programs without established provider relationships face additional hurdles.

HB 1030 was introduced during the lame duck session, and the timeline for passage is uncertain. Construction stakeholders should treat this bill as a policy in development, not an inevitability. The right response is preparation, not reaction.

Build the Evidence Case for NCCER Credentials

Whether or not HB 1030 passes this session, the policy direction toward outcome-validated credentials is clear. Construction employers and apprenticeship sponsors should begin assembling evidence now. Continuous learning credentials demonstrate adaptability and a commitment to skill development; the same principle applies to organizational readiness.

Recommended data collection:

  • Employer endorsement letters. Gather written statements from contractors, project owners, and trade associations that explicitly recognize NCCER credentials in hiring or promotions. A blend of relevant experience and recognized credentials enhances a candidate’s professional profile; these letters should say so with specifics.
  • Completion rates. Track how many apprentices enrolled in each NCCER level, how many passed, and how long completion took. Standardized assessments are part of NCCER’s credentialing process; document the pass rates.
  • Retention outcomes. Measure how many credentialed workers stay in the trade over one, three, and five years. Track movement from helper to journeyperson.
  • Wage progression by NCCER level. Compare wages before and after attainment of each level (Core, Level 1, Level 2, and beyond). Regional data is stronger than national averages.

Document Portability and Credential Quality

NCCER’s online verification system (the Registry) is concrete portability evidence. It lets workers check their credential status and share verified records with any employer or institution. Unlike professional licenses, which establish legal authority to perform certain regulated occupations, or professional memberships, which create networking opportunities and enhance industry visibility, craft credentials through NCCER verify applied technical skills.

Technical credentials validate proficiency in specific technologies and are critical for IT-related roles; the same validation principle applies to construction craft certifications, where third-party validated credentials are recognized by industry associations and educational bodies alike.

Key portability and quality evidence:

Evidence Type Source
Online credential verification NCCER Registry
Stackability (Core → Level 1 → Level 2 → journey level) NCCER curriculum structure
Industry recognition, stackability, portability definitions U.S. Department of Labor guidance (TEN 04-26)
Employment outcomes for credential holders Employer records, state wage data

The U.S. Department of Labor recognizes the importance of professional credentials in securing specialized work and defines credential quality through four factors: industry recognition, stackability, portability, and accreditation. Certification requirements may involve rigorous assessments and ongoing education to maintain validity. NCCER’s structure aligns with each of these factors; the task for Ohio construction is documenting that alignment with Ohio-specific data.

A group of construction apprentices, wearing safety gear, stands together at a training facility, showcasing their commitment to learning essential skills needed for the industry. These students are engaged in a program that offers industry-recognized credentials and certifications, preparing them for future employment opportunities.

Prepare Members for Legislative and Administrative Engagement

ABC Ohio Valley members have several engagement points as HB 1030 moves forward.

Monitor committee activity. Track which House or Senate committee will hear the bill. Review the bill text, any proposed amendments, and draft rules. The bill’s status page on the Ohio Legislature website is the authoritative source.

Prepare testimony. Apprenticeship sponsors and NCCER program operators should be ready to present credential evidence: wage data, employer recognition letters, portability documentation, and completion and retention numbers. This is the chance to make the evidence case for construction credentials before the list is finalized.

Engage during rulemaking. If HB 1030 passes, the Ohio Department of Development will conduct rulemaking to define the credentials of value list’s specific criteria and review process. Workforce leaders should participate in that process, submit public comments, and coordinate with other construction programs to present a unified case.

Coordinate as a chapter. Trade contractors, OVCEF, and other ABC Ohio Valley partners should assemble a joint evidence package. Combining data from multiple employers and programs strengthens the case for NCCER inclusion.

Provide Nonpartisan Context for Ohio Construction Leaders

HB 1030 was introduced during the lame duck construction agenda, the legislative period after an election but before new members take office. Workforce bills sometimes gain traction in this window, but passage is not assured and should not be assumed.

HB 1030 is distinct from SB 464, another bill under consideration in Ohio that touches workforce policy. The two may overlap in subject, but HB 1030 is narrowly focused on TechCred and IMAP credential eligibility. Construction associations should track both but avoid conflating them.

Why does this matter for merit-shop construction? How credentials are defined and funded shapes how contractors train workers, compete for contracts, and manage hiring. Credential policy is not abstract; it affects firm costs and the workforce pipeline. Regardless of political party, credential funding is under pressure for accountability. Programs that cannot demonstrate labor-market outcomes face scrutiny under frameworks like the one HB 1030 proposes.

ABC Ohio Valley’s perspective is straightforward: merit-shop employers invest in training because safe, skilled workers build better projects. State policy should recognize and support that investment, and the credentials-of-value framework is a chance to prove that case with data.

Close With Practical Next Steps

Employers: Review current TechCred credential requirements now. Compare your desired construction credentials against the eligible-credential list and the technology-focused definition. If you plan to submit NCCER credentials through the “Credential Not Listed” process for the October round, gather your documentation before the October 30 deadline.

Apprenticeship sponsors: Organize your NCCER performance records. Compile completion rates by credential level, time to completion, attrition data, and wage records. You’ll need these whether the credentials of value list is created through HB 1030 or a future administrative action.

Workforce development leaders: Coordinate employer validation. Collect endorsement letters, job postings that require NCCER credentials, pay differential data, and survey results from contractors. The stronger the evidence package, the stronger the case for inclusion.

Credentials of value remain a developing policy question. HB 1030 has not passed, rules have not been written, and the list does not yet exist. That is precisely why the time to act is now. The evidence you gather today will shape whether construction credentials earn a permanent place on Ohio’s list tomorrow.

A wide-angle view of a bustling commercial construction site in Ohio, featuring cranes and workers clad in reflective gear, emphasizing the importance of safety and training in the industry. This scene highlights the skills needed and industry-recognized credentials that students and workers acquire through various programs and courses to meet employer expectations.

Cite the Controlling Sources

  • Bill status and provisions: Ohio Legislature HB 1030 record, including sponsors, introduction date, amended sections (RC 122.178, RC 4141.162), new section (RC 122.1714), and current status.
  • Funding rules and credential eligibility: Ohio Department of Development TechCred Program guidelines, including the October 2026 application round dates, reimbursement caps, and credential definition.
  • Credential quality standards: U.S. Department of Labor guidance (TEN 04-26), defining industry recognition, stackability, portability, and accreditation as credential quality factors.
  • Portability evidence: NCCER credential information, including the online Registry, global recognition, and journey-level credential verification.